Carlisle Barritech VP 50 Gallon Drum
Carlisle Barritech VP 50 Gallon Drum
- Vendor
- Metal Pros LLC
$1,569.36
Description
Barritech VP is a fluid-applied membrane made from inherently fire-
resistant materials. Barritech VP is applied to exterior wall assemblies
where it functions as an air barrier and a water-resistive barrier. Barritech
VP may be installed down to 20
°
F. Barritech VP is vapor-permeable —
moisture vapor can diffuse directly through the membrane. Barritech VP
can
be applied over concrete block, concrete, exterior gypsum sheathing,
plywood,
OSB and many other common building materials. The product
is fully adhered to the substrate, flexible and rubber-like. Barritech VP
is a single-component, air-drying product applied by spray or roller. The
flexible, elastic
properties enable Barritech VP to bridge cracks and seal
around penetrations,
which creates a truly continuous, monolithic air and
water barrier.
Features and Benefits
•
Fire-retardant chemistry permits use in many wall assemblies
requiring NFPA 285
•
Dries to a distinctive blue color for easy identification (lighter blue
color when wet)
•
180-day UV resistance and ability to install below freezing allows
flexibility in schedule
•
Vapor-permeable feature permits use in wall assemblies where a
vapor barrier is not needed
•
Greenguard Gold low-emitting material, product-specific EPD
available - Contributes to LEED Points
•
Easy, water clean-up of tools & equipment reduces harmful
chemicals on the jobsite
•
Spray-through standard, one-part equipment provides a simple and
quick installation
•
Monolithic coverage and self-sealing properties around fasteners
enable an air and watertight installation
•
Non-asphalt composition permits contact with many window and
joint sealants
•
Barritech VP is a warranted air barrier system from Carlisle Coatings
& Waterproofing
|
Project Conditions
Building codes and project specifications require continuity of the air
barrier installation. It is the installer’s responsibility to understand the
extent and sequencing of air barrier installation on the project. Do not
proceed with installation until substrate and project conditions conform
to requirements specified in this document. Identify any membranes,
coatings, sealants, tapes and joint compounds by others which will
come into contact with Barritech VP and CCW accessories, and verify
compatibility through CCW. All surfaces accepting Barritech VP and
CCW accessories shall be clean, dry, frost free and of sound condition.
Verify that wall assemblies are dried in, such that water intrusion will
not occur from above, behind or around the membrane installation. Gaps
and cracks shall be filled with materials and technique approved by CCW.
Large gaps such as those commonly found in electrical/mechanical
penetrations, structural steel penetrations, columns/beams, expansion/
seismic joints, shelf angles, tie-ins to fenestration and transitions to other
building
assemblies require extra work and materials to provide suitable
surfaces for continuous installation of the air barrier. Please consult
CCW’s Barritech VP details for guidance.
Barritech VP
